Deutsch HD10 Series Connectors

Deutsch HD10 Series Connectors

Deutsch HD10 Series Connectors

Deutsch HD10 Series Connectors are an environmentally sealed, thermoplastic cylindrical connector series and offers arrangements from 3 to 9 cavities. All HD10 connectors are available either in-line or flanged and accept size 12 or 16 contacts, or a combination of size 16 and size 4 contacts. The HD10 Series is heavily used for diagnostic connectors, eliminates problems associated with assembly and maintenance time, and is designed for long service life.

Key Features:

Material Specifications:

  • Accepts contact sizes 4 (100 amps), 12 (25amps), and 16 (13 amps)
  • 6-20 AWG
  • 3, 4, 5, 6, and 9 cavity arrangements
  • In-line, flange, or PCB mount
  • Circular, thermoplastic housing
  • Coupling ring for mating
  • Grommet: Silicone rubber
  • Insert Retainer: Thermoplastic
  • Receptacle Interfacial Seal: Silicone rubber
  • Shell: Thermoplastic

Performance Specifications:

DEUTSCH HD10 connectors will stand up to the harsh environmental challenges that are common to industrial markets that require advanced performance. Proper parts, procedures, and tooling must be used.

Temperature: Operating at temperatures from -55° C to +125° C continuous at rated current.

Durability: No electrical or mechanical defects after 100 cycles of engagement and disengagement.

Vibration: No unlocking or unmating and exhibits no mechanical or physical damage after sinusoidal vibration levels of 20 G’s at 10 to 2000 Hz in each of the three mutually perpendicular planes. No electrical discontinuities longer than 1 microsecond.

Physical Shock: No unlocking, unmating, or other unsatisfactory result during or after 50 G’s in each of three mutually perpendicular planes. No electrical discontinuities longer than 1 microsecond. MIL-STD 202, Method 213, Condition “C”.

Fluid Resistance: Connectors show no damage when exposed to most fluids used in industrial applications.

Insulation Resistance: 1000 megohms minimum at 25° C.

Moisture Resistance: Properly wired and mated connections will withstand immersion under three feet of water without loss of electronic qualities or leakage.

Dielectric Withstanding Voltage: Current leakage less than 2 milliamps at 1500 VAC.

Thermal Cycle: No cracking, chipping or leaking after 20 test cycles from -55° C to +125° C.

24 Item(s)

per page

24 Item(s)

per page

Deutsch HD10 Series Connectors. Deutsch HD10 Series Connectors Deutsch HD10 Series Connectors are an environmentally sealed, thermoplastic cylindrical connector series and offers arrangements from 3 to 9 cavities. All HD10 connectors are available either in-line or flanged and accept size 12 or 16 contacts, or a combination of size 16 and size 4 contacts. The HD10 Series is heavily used for diagnostic connectors, eliminates problems associated with assembly and maintenance time, and is designed for long service life. Key Features: Material Specifications: Accepts contact sizes 4 (100 amps), 12 (25amps), and 16 (13 amps) 6-20 AWG 3, 4, 5, 6, and 9 cavity arrangements In-line, flange, or PCB mount Circular, thermoplastic housing Coupling ring for mating Grommet: Silicone rubber Insert Retainer: Thermoplastic Receptacle Interfacial Seal: Silicone rubber Shell: Thermoplastic Performance Specifications: DEUTSCH HD10 connectors will stand up to the harsh environmental challenges that are common to industrial markets that require advanced performance. Proper parts, procedures, and tooling must be used. Temperature: Operating at temperatures from -55° C to +125° C continuous at rated current. Durability: No electrical or mechanical defects after 100 cycles of engagement and disengagement. Vibration: No unlocking or unmating and exhibits no mechanical or physical damage after sinusoidal vibration levels of 20 G’s at 10 to 2000 Hz in each of the three mutually perpendicular planes. No electrical discontinuities longer than 1 microsecond. Physical Shock: No unlocking, unmating, or other unsatisfactory result during or after 50 G’s in each of three mutually perpendicular planes. No electrical discontinuities longer than 1 microsecond. MIL-STD 202, Method 213, Condition “C”. Fluid Resistance: Connectors show no damage when exposed to most fluids used in industrial applications. Insulation Resistance: 1000 megohms minimum at 25° C. Moisture Resistance: Properly wired and mated connections will withstand immersion under three feet of water without loss of electronic qualities or leakage. Dielectric Withstanding Voltage: Current leakage less than 2 milliamps at 1500 VAC. Thermal Cycle: No cracking, chipping or leaking after 20 test cycles from -55° C to +125° C.

Prices from $3.86 to $74.58